Tissue Overlay Treated with Melamine Resin Decorative Paper Treated with Melamine Resin Layers of Kraft Papers Treated with Phenolic Resin Decorative Paper Treated with Melamine Resin Tissue Overlay Treated with Melamine Resin Product Construction VOC IMPACT RESISTANT BORER/ TERMITE RESISTANT LOW VOC MOISTURE RESISTANT Protek Note: 1. The product is meant for Vertical Light duty applications only. 2. While the Kajaria Laminates products are manufactured to the highest standards, the nature of the application procedure is beyond our control. The values given above are to the best of knowledge but without liability/warranty, expressed or implied. 3. Application images and Product Scan shown in the E-catalogue are for illustration purpose only, please refer to the actual product/décor for colour and finish available. Technical Specifications LINER PROTEK Type and Thickness VLS, Thickness 0.70 mm 0.70 Nominal S. NO. REQUIREMENT AS PER IS 2046: 1995 LINER PROTEK COMPLIANCE 1 Dimensional Properties Length (2440 mm) +10, -Nil Conforms Width (1220 mm) +10, -Nil Conforms Thickness 0.70 ± 0.10 mm 0.65 to 0.72 Squareness 1.5 mm/ M, max Conforms Straightness of edges 1.5 mm/ M, max Broken corner One broken corner of ≤ 30 mm or two broken corners of≤ 15 mm are allowed. 2 Flatness 120 mm/M, max Conforms 3 Resistance to surface wear, Revolutions (IP+FP)/2 50 (Min) Conforms 4 Resistance to Immersion in boiling water a) Mass increase, % 12.0 (Max) Conforms b) Thickness increase, % 14.0 (Max) Conforms c) Appearance Not worse than Grade 3 Conforms 5 Dimensional stability at deviated temperature Longitudinal 0.7 % (Max) Conforms Transverse 1.15 % (Max) Conforms 6 Resistance to impact by small diameter ball, Load 15 N (Min) Conforms 7 Resistance to colour change In Xenon Arc light Not worse than Grade 6 Conforms 8 Resistance to cracking Not worse than Grade 4 Conforms 9 Resistance to scratching 1.5 (Min) Conforms 10 Resistance to staining Not worse than Grade 5 Conforms 11 Resistance to steam Not worse than Grade 3 Conforms NOTE: • All designs are available in Suede, Matt & Gloss finishes • Thicknesses available: 0.70 mm, 0.80 mm & 0.92 mm • Dimension available: 4 ft x 8 ft PERFORMANCE CHARACTERISTICS
RkJQdWJsaXNoZXIy MTQ1NTA=